Mike's Manger

NO CRIB FOR A BED
Construction considerations abound in this project.

SHOP OWNER: Mike Delfuoco
LOCATION: Roseville, MI

    Last fall I built a manger for the front lawn of our church over Christmas. One of the things that I had to consider while building it was making it look like it was 2000 years old.
Mike's Manger

    A local lumberyard that specializes in lumber for shipping pallets provided the rough-sawn lumber, which gave me the old look I was after.
Mike's Manger

    Another consideration was making the sections as light as possible. To accomplish this, I made the frame out of 2 x 2s and used x 6 and x 4 boards for the siding.
Mike's Manger

    Nevertheless, because the lumber was not very dry, I ran into some problems when the panels that did not have an outside frame warped. You can see what happened to the first set of roof panels. I made the second set out of x 6-inch Cedar fence boards and they worked fine.
Mike's Manger

    Some additional construction considerations were that I had to build it so it could be assembled and disassembled easily. Furthermore, since it is stored for eleven months of the year, it had to take up as little room as possible. The entire thing consists of ten panels that bolt together using 4-inch long, -inch carriage bolts, which can be assembled in about a half hour. Once disassembled and stored, it takes up nine feet of garage wall space, eighteen inches deep.

. . . Mike Delfuoco


 
CLICK HERE TO RETURN TO THE    INDEX!

 

SEND US YOUR "SHOP SHOTS"
This is the place to share views of your shop, woodworking tips and methods,
mug shots, special tools or machines, finished work--you name it!
    We prefer digital images via e-mail, but prints or transparencies will do. Include your name, address, phone number and a paragraph or two explaining the photo(s). Not every entry will be used, we reserve the right to edit for length and clarity, and we will not return photos.

WoodCentral
P.O. Box 493
Springtown, PA 18081