Saw Dating *PIC* -- David Miller from Iowa -- Friday, 16 November 2007, at 3:47 p.m.
6 messages -- Newest posted Monday, 19 November 2007, at 4:31 a.m.
WorkBench Skirts and Aprons? -- Brad in Ottawa -- Friday, 16 November 2007, at 3:53 p.m.
11 messages -- Newest posted Monday, 19 November 2007, at 4:32 a.m.
Re: Question for Pam and others -- Hank Knight -- Friday, 16 November 2007, at 5:54 p.m.
3 messages -- Newest posted Saturday, 17 November 2007, at 10:42 a.m.
The Veritas Small Plow Plane - Reviewed -- Derek Cohen (in Perth, Australia) -- Friday, 16 November 2007, at 8:48 p.m.
15 messages -- Newest posted Monday, 19 November 2007, at 11:43 p.m.
Todd Hughes -- Moses Yoder in White Pigeon, MI -- Saturday, 17 November 2007, at 6:43 a.m.
10 messages -- Newest posted Saturday, 24 November 2007, at 3:36 p.m.
OT Giving Thanks -- Stephen Shepherd in the State of Deseret -- Saturday, 17 November 2007, at 7:58 a.m.
4 messages -- Newest posted Saturday, 17 November 2007, at 7:49 p.m.
Miscellany - scrub plane; semi-gloat *LINK* -- Bill Houghton, overcast in Sebastopol, CA -- Saturday, 17 November 2007, at 9:48 p.m.
2 messages -- Newest posted Friday, 23 November 2007, at 1:17 p.m.
How'd I do? Gloat? -- Mike Schwing from Maryland -- Sunday, 18 November 2007, at 5:03 p.m.
5 messages -- Newest posted Monday, 19 November 2007, at 10:16 a.m.
Old american made water stone *PIC* -- Jack Guzman from Maine -- Sunday, 18 November 2007, at 5:10 p.m.
5 messages -- Newest posted Tuesday, 20 November 2007, at 8:05 a.m.
Old tool company in Buffalo -- Jock Cameron -- Sunday, 18 November 2007, at 7:49 p.m.
2 messages -- Newest posted Monday, 19 November 2007, at 5:09 p.m.
Headed downslope, event horizon in sight -- Bill Houghton, overcast in Sebastopol, CA -- Sunday, 18 November 2007, at 11:24 p.m.
3 messages -- Newest posted Monday, 19 November 2007, at 5:35 p.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 20 November 2007, at 6:10 a.m.
1 message
OK, Wha'd I find this time? 4 unknowns *PIC* -- Kevin French, Antrim, NH -- Tuesday, 20 November 2007, at 3:58 p.m.
8 messages -- Newest posted Thursday, 22 November 2007, at 7:05 a.m.
Have Cecil Pierce planes become collectible? -- Denis Chénard, Orléans, Ont. -- Tuesday, 20 November 2007, at 5:03 p.m.
11 messages -- Newest posted Friday, 23 November 2007, at 4:24 p.m.
Genetically modified trees *LINK* -- Pam Niedermayer - Austin, TX -- Tuesday, 20 November 2007, at 6:04 p.m.
14 messages -- Newest posted Thursday, 22 November 2007, at 8:50 a.m.
Just finished -- Stuart Hough -- Tuesday, 20 November 2007, at 8:08 p.m.
2 messages -- Newest posted Sunday, 25 November 2007, at 5:41 p.m.
tenon saws -- Ross -- Wednesday, 21 November 2007, at 11:51 a.m.
11 messages -- Newest posted Friday, 23 November 2007, at 9:56 p.m.
*** New Messageboard Format *** -- Ellis Walentine -- Wednesday, 21 November 2007, at 1:22 p.m.
99 messages -- Newest posted Monday, 26 November 2007, at 4:02 p.m.
LN vs Veritas Router Planes -- Jim O'Neal -- Wednesday, 21 November 2007, at 6:52 p.m.
8 messages -- Newest posted Friday, 30 November 2007, at 7:37 p.m.
Cedar as a rust preventer? -- Todd O. Cronkhite Maine Native, Presently Away -- Wednesday, 21 November 2007, at 9:06 p.m.
12 messages -- Newest posted Sunday, 25 November 2007, at 4:07 a.m.
Daily Bread / CD Cabinet -- Moses Yoder in White Pigeon, MI -- Thursday, 22 November 2007, at 6:54 a.m.
5 messages -- Newest posted Thursday, 22 November 2007, at 7:33 p.m.
Pull saw . . . -- Steve Mackay -- Thursday, 22 November 2007, at 9:40 a.m.
6 messages -- Newest posted Friday, 23 November 2007, at 4:42 p.m.
Thanks Andy! -- Mike Schwing from Maryland -- Thursday, 22 November 2007, at 10:05 a.m.
1 message
Messageboard format comments and test *PIC* -- Bill Houghton, sunny Turkey day in Sebastopol, CA -- Thursday, 22 November 2007, at 9:39 p.m.
10 messages -- Newest posted Friday, 23 November 2007, at 6:16 p.m.
Cushions for morris chair *PIC* -- Patrick Wheatley -- Friday, 23 November 2007, at 8:25 a.m.
17 messages -- Newest posted Tuesday, 27 November 2007, at 10:48 a.m.
Work Sharp WS3000 -- Chicago Bob -- Friday, 23 November 2007, at 1:14 p.m.
2 messages -- Newest posted Friday, 23 November 2007, at 1:50 p.m.
Remember the POND! -- Alan Young -- Friday, 23 November 2007, at 2:47 p.m.
11 messages -- Newest posted Tuesday, 27 November 2007, at 2:15 p.m.
Shaker writing desk *PICs* -- Mike Schwing from Maryland -- Friday, 23 November 2007, at 6:21 p.m.
15 messages -- Newest posted Sunday, 25 November 2007, at 5:44 a.m.
Badger Pond CD -- Derek Cohen (in Perth, Australia) -- Friday, 23 November 2007, at 7:48 p.m.
3 messages -- Newest posted Sunday, 25 November 2007, at 9:20 a.m.
Medium or Large LV Shoulder Plane? -- Dominic Greco in Richboro PA -- Friday, 23 November 2007, at 8:13 p.m.
14 messages -- Newest posted Thursday, 29 November 2007, at 1:14 p.m.
Dating a LN Scraper -- David Miller from Iowa -- Friday, 23 November 2007, at 8:24 p.m.
5 messages -- Newest posted Thursday, 29 November 2007, at 11:07 p.m.
Algotrithm -- David Miller from Iowa -- Friday, 23 November 2007, at 8:33 p.m.
3 messages -- Newest posted Sunday, 25 November 2007, at 5:39 p.m.
I'd like to thank Ellis -- Bill Houghton, leftover turkey yum! Sebastopol, CA -- Friday, 23 November 2007, at 10:45 p.m.
5 messages -- Newest posted Tuesday, 27 November 2007, at 5:02 a.m.
Ba humbug bad format -- Bart Leetch -- Saturday, 24 November 2007, at 1:38 a.m.
13 messages -- Newest posted Monday, 26 November 2007, at 10:34 p.m.
Recycling a Ladder -- Derek Cohen (in Perth, Australia) -- Saturday, 24 November 2007, at 11:19 a.m.
8 messages -- Newest posted Monday, 26 November 2007, at 12:47 a.m.
The Final Location of the Teak Bench -- HC Sakman -- Saturday, 24 November 2007, at 12:40 p.m.
6 messages -- Newest posted Saturday, 24 November 2007, at 6:38 p.m.
spring harvest w.w . school -- chichi -- Sunday, 25 November 2007, at 1:37 a.m.
6 messages -- Newest posted Tuesday, 27 November 2007, at 11:22 a.m.
Florida Get-Together *PIC* -- Mike Fitterling -- Sunday, 25 November 2007, at 9:18 a.m.
7 messages -- Newest posted Tuesday, 27 November 2007, at 2:20 p.m.
WC Secret Santa? -- Chris K in MD -- Sunday, 25 November 2007, at 10:53 a.m.
3 messages -- Newest posted Wednesday, 28 November 2007, at 11:46 a.m.
Found the Recipe -- Stephen Shepherd in the State of Deseret -- Sunday, 25 November 2007, at 11:27 a.m.
3 messages -- Newest posted Sunday, 25 November 2007, at 4:30 p.m.
Stanley Chisel Type -- Robert L. -- Sunday, 25 November 2007, at 5:20 p.m.
4 messages -- Newest posted Monday, 26 November 2007, at 12:03 p.m.
Late model English Stanley combo plane cutters -- Bill Houghton, cold today, Sebastopol, CA -- Sunday, 25 November 2007, at 5:35 p.m.
5 messages -- Newest posted Monday, 26 November 2007, at 4:46 a.m.
Jointer and Fore Plane Till -- Dominic Greco in Richboro PA -- Sunday, 25 November 2007, at 9:55 p.m.
10 messages -- Newest posted Monday, 26 November 2007, at 10:27 p.m.
Stock prep??? -- HB -- Monday, 26 November 2007, at 9:36 p.m.
11 messages -- Newest posted Tuesday, 27 November 2007, at 3:39 p.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 27 November 2007, at 7:12 a.m.
1 message
***SURVEY: The Ides of November*** -- Ellis Walentine -- Tuesday, 27 November 2007, at 7:21 a.m.
4 messages -- Newest posted Wednesday, 28 November 2007, at 4:49 p.m.
Winterfest -- Adam Cherubini -- Tuesday, 27 November 2007, at 11:46 a.m.
3 messages -- Newest posted Wednesday, 28 November 2007, at 1:47 a.m.
Wow!! Toolsforworkingwood -- Dean Lapinel -- Tuesday, 27 November 2007, at 3:48 p.m.
9 messages -- Newest posted Wednesday, 28 November 2007, at 10:50 p.m.
WC Benefit Auction, A Fountain Pen *LINK* -- Jim Shaver - Oakville, Ontario -- Tuesday, 27 November 2007, at 6:29 p.m.
2 messages -- Newest posted Wednesday, 28 November 2007, at 5:06 p.m.
Can you identify this wood? *PIC* -- Stephen Shepherd in the State of Deseret -- Tuesday, 27 November 2007, at 7:36 p.m.
8 messages -- Newest posted Wednesday, 28 November 2007, at 1:56 p.m.
SIX New Shop Shots -- David Yoho -- Tuesday, 27 November 2007, at 8:21 p.m.
1 message
Bling for engineers? *LINK* -- Cooper Suter -- Wednesday, 28 November 2007, at 10:01 a.m.
16 messages -- Newest posted Sunday, 2 December 2007, at 2:03 p.m.
waxing plane soles -- Les Winter -- Thursday, 29 November 2007, at 1:03 p.m.
5 messages -- Newest posted Thursday, 29 November 2007, at 2:59 p.m.
Stanely #7 - Flatten sole? -- HB -- Thursday, 29 November 2007, at 2:17 p.m.
12 messages -- Newest posted Monday, 3 December 2007, at 7:45 a.m.
Wood Central Secret Santa - late but alive -- Pat Riley -- Thursday, 29 November 2007, at 3:24 p.m.
2 messages -- Newest posted Thursday, 29 November 2007, at 4:21 p.m.
Turning Tools for Newbie -- Justin Fields -- Thursday, 29 November 2007, at 3:29 p.m.
3 messages -- Newest posted Thursday, 29 November 2007, at 4:15 p.m.
Pruning Saw? *LINK* -- Todd O. Cronkhite Maine Native, Presently Away -- Thursday, 29 November 2007, at 5:41 p.m.
8 messages -- Newest posted Friday, 30 November 2007, at 6:38 p.m.
reasonable price? -- Steven Kubien -- Thursday, 29 November 2007, at 6:06 p.m.
6 messages -- Newest posted Friday, 30 November 2007, at 1:12 p.m.
Waste Not Want Not - Scraper Sharpener *PIC* -- Garrett in Victoria -- Thursday, 29 November 2007, at 6:57 p.m.
3 messages -- Newest posted Friday, 30 November 2007, at 12:47 a.m.
Rabbeting and grooving Plywood with handtools? -- Dominic Greco in Richboro PA -- Thursday, 29 November 2007, at 9:00 p.m.
11 messages -- Newest posted Saturday, 1 December 2007, at 12:48 p.m.
Using SYP As a Secondary Wood -- Tom Colligan -- Thursday, 29 November 2007, at 9:52 p.m.
15 messages -- Newest posted Saturday, 1 December 2007, at 11:18 a.m.
Sealing weight into a joiners mallet -- Stephen Kirk in Quakertown, PA -- Friday, 30 November 2007, at 7:33 p.m.
13 messages -- Newest posted Tuesday, 4 December 2007, at 11:24 p.m.
Recent Workshop *PIC* -- Stephen Shepherd in the State of Deseret -- Saturday, 1 December 2007, at 8:19 a.m.
10 messages -- Newest posted Saturday, 1 December 2007, at 6:02 p.m.
Chris Schwarz's new book--review *LINK* -- Roy Anderson -- Saturday, 1 December 2007, at 8:56 a.m.
5 messages -- Newest posted Sunday, 2 December 2007, at 12:26 p.m.
# 289 steel . . . *PIC* -- steve mackay -- Saturday, 1 December 2007, at 9:54 a.m.
8 messages -- Newest posted Wednesday, 5 December 2007, at 3:26 p.m.
Stephen -- Marv -- Saturday, 1 December 2007, at 11:55 a.m.
49 messages -- Newest posted Tuesday, 4 December 2007, at 9:18 p.m.
Removing the tedium of chopping dovetails -- Bill Tindall, E.TN -- Saturday, 1 December 2007, at 4:42 p.m.
4 messages -- Newest posted Saturday, 1 December 2007, at 11:37 p.m.
Stephen Shepherd -- Dean Lapinel -- Saturday, 1 December 2007, at 5:38 p.m.
4 messages -- Newest posted Tuesday, 4 December 2007, at 2:26 p.m.
Using Super Glue as a finish *LINK* -- BobStrawn -- Saturday, 1 December 2007, at 6:29 p.m.
3 messages -- Newest posted Monday, 3 December 2007, at 2:12 p.m.
Eye dominance -- Bill Houghton, like MN today, Sebastopol, CA -- Saturday, 1 December 2007, at 9:40 p.m.
16 messages -- Newest posted Wednesday, 5 December 2007, at 7:53 p.m.
Little Victor handplane -- Jack Guzman from Maine -- Sunday, 2 December 2007, at 7:00 a.m.
12 messages -- Newest posted Tuesday, 4 December 2007, at 12:16 a.m.
"Infill" Mallets *LINK* -- scottg -- Sunday, 2 December 2007, at 11:40 a.m.
7 messages -- Newest posted Tuesday, 4 December 2007, at 11:19 a.m.
RE : # 289 steel . . . -- steve mackay -- Sunday, 2 December 2007, at 6:23 p.m.
2 messages -- Newest posted Tuesday, 4 December 2007, at 11:20 a.m.
L. Bailey #20 circle plane -- Mike Baker -- Sunday, 2 December 2007, at 7:04 p.m.
8 messages -- Newest posted Monday, 3 December 2007, at 7:20 p.m.
Drawbore Pin Help! -- Chuck Nickerson -- Sunday, 2 December 2007, at 11:51 p.m.
18 messages -- Newest posted Thursday, 6 December 2007, at 6:13 p.m.
BIG New Shop Shot -- David Yoho -- Monday, 3 December 2007, at 9:22 a.m.
1 message
How to harvest hand saw nuts *PIC* -- David Miller from Iowa -- Monday, 3 December 2007, at 3:43 p.m.
5 messages -- Newest posted Monday, 10 December 2007, at 1:10 p.m.
UPDATE... *PIC* -- Scott in Douglassville, PA -- Monday, 3 December 2007, at 4:13 p.m.
12 messages -- Newest posted Wednesday, 5 December 2007, at 10:10 a.m.
Late 19th Century Plated Drill Braces -- David W Dougherty -- Monday, 3 December 2007, at 7:34 p.m.
7 messages -- Newest posted Tuesday, 4 December 2007, at 11:53 a.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 4 December 2007, at 6:37 a.m.
1 message
Instant Saw Set Till *PIC* -- Kevin French, Antrim, NH -- Tuesday, 4 December 2007, at 9:02 p.m.
7 messages -- Newest posted Wednesday, 5 December 2007, at 5:49 p.m.
What is this for? *LINK* -- David Miller from Iowa -- Tuesday, 4 December 2007, at 9:38 p.m.
3 messages -- Newest posted Tuesday, 4 December 2007, at 11:04 p.m.
Chris and Adam, *LINK* -- Pam Niedermayer - Austin, TX -- Tuesday, 4 December 2007, at 11:18 p.m.
22 messages -- Newest posted Sunday, 9 December 2007, at 11:43 p.m.
Hollows and Rounds with Todd Herrli -- Jack Guzman from Maine -- Wednesday, 5 December 2007, at 5:13 a.m.
8 messages -- Newest posted Wednesday, 5 December 2007, at 10:19 p.m.
chip breaker/cap iron or not? -- Mike Schwing from Md. -- Wednesday, 5 December 2007, at 10:52 a.m.
67 messages -- Newest posted Wednesday, 12 December 2007, at 2:05 a.m.
Another "nothing new under the sun" moment -- Bill Houghton, Sebastopol, CA, the rain's here -- Thursday, 6 December 2007, at 1:45 p.m.
9 messages -- Newest posted Thursday, 6 December 2007, at 10:20 p.m.
Hamler scraper inserts -- dave brown -- Thursday, 6 December 2007, at 4:17 p.m.
7 messages -- Newest posted Friday, 7 December 2007, at 4:30 p.m.
How do I make this box? *PIC* -- HB -- Thursday, 6 December 2007, at 8:41 p.m.
28 messages -- Newest posted Sunday, 9 December 2007, at 10:44 p.m.
Stephen Proctor-Marc Adams School -- Tony Sade (Charleston, WV) -- Friday, 7 December 2007, at 11:14 a.m.
4 messages -- Newest posted Monday, 10 December 2007, at 4:36 p.m.
Question for Chris Scholz *LINK* -- Wiley Horne -- Friday, 7 December 2007, at 5:55 p.m.
19 messages -- Newest posted Thursday, 13 December 2007, at 7:01 a.m.
finishing problem -- Les Winter -- Saturday, 8 December 2007, at 12:43 p.m.
5 messages -- Newest posted Sunday, 9 December 2007, at 10:51 a.m.
Benefit Auction Posting -- HC Sakman -- Saturday, 8 December 2007, at 2:07 p.m.
2 messages -- Newest posted Monday, 10 December 2007, at 5:05 a.m.
worm holes in plow fence *PIC* -- Jack Guzman from Maine -- Sunday, 9 December 2007, at 4:47 p.m.
13 messages -- Newest posted Monday, 10 December 2007, at 7:23 p.m.
Early Xmas *PIC* -- Kevin French, Antrim, NH -- Monday, 10 December 2007, at 12:14 p.m.
12 messages -- Newest posted Thursday, 13 December 2007, at 4:05 p.m.
I. Sorby dates? -- Wiley Horne -- Tuesday, 11 December 2007, at 4:39 a.m.
4 messages -- Newest posted Tuesday, 11 December 2007, at 11:57 p.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 11 December 2007, at 7:19 a.m.
1 message
Plane "Handing"? *LINK* -- David Miller from Iowa -- Tuesday, 11 December 2007, at 9:00 a.m.
6 messages -- Newest posted Wednesday, 12 December 2007, at 11:55 a.m.
German Beech -- GregForster -- Tuesday, 11 December 2007, at 6:24 p.m.
7 messages -- Newest posted Wednesday, 12 December 2007, at 6:02 p.m.
Woodworking Magazine site down -- Christopher Schwarz -- Wednesday, 12 December 2007, at 9:24 a.m.
3 messages -- Newest posted Wednesday, 12 December 2007, at 12:28 p.m.
Laser Guided Handsaw *LINK* -- Jake J. (Windsor, Ontario) -- Wednesday, 12 December 2007, at 3:35 p.m.
2 messages -- Newest posted Wednesday, 12 December 2007, at 4:41 p.m.
LV - LN Bevel Up Plane Comparison? -- David Cockey -- Wednesday, 12 December 2007, at 6:01 p.m.
6 messages -- Newest posted Wednesday, 12 December 2007, at 10:27 p.m.
Very cool episode of Dirty Jobs -- Jay Samuels -- Wednesday, 12 December 2007, at 7:15 p.m.
5 messages -- Newest posted Thursday, 13 December 2007, at 10:16 p.m.
LN 8 vs Veritas BU Jointer -- Jim Shaver - Oakville, Ontario -- Wednesday, 12 December 2007, at 10:46 p.m.
55 messages -- Newest posted Tuesday, 18 December 2007, at 11:54 p.m.
Workbench tops -- Stephen Shepherd in the State of Deseret -- Thursday, 13 December 2007, at 7:46 a.m.
15 messages -- Newest posted Friday, 28 December 2007, at 11:15 a.m.
Hide Glue in a bottle? -- Marv -- Thursday, 13 December 2007, at 1:41 p.m.
42 messages -- Newest posted Wednesday, 19 December 2007, at 8:46 a.m.
Tool Gloat *PIC* -- Stephen Shepherd in the State of Deseret -- Thursday, 13 December 2007, at 5:32 p.m.
2 messages -- Newest posted Friday, 14 December 2007, at 1:46 p.m.
Powder coating vs. jappaning -- Michael Brady -- Thursday, 13 December 2007, at 6:00 p.m.
11 messages -- Newest posted Monday, 17 December 2007, at 5:50 p.m.
Prayers for Alan Bierbaum -- Ellis Walentine -- Friday, 14 December 2007, at 2:02 a.m.
10 messages -- Newest posted Sunday, 16 December 2007, at 2:04 a.m.
Merry Christmas from Loki *PIC* -- Moses Yoder in White Pigeon, MI -- Friday, 14 December 2007, at 5:01 p.m.
6 messages -- Newest posted Monday, 17 December 2007, at 12:27 p.m.
Why I love Tasmanian Blackwood *PIC* -- Derek Cohen (in Perth, Australia) -- Saturday, 15 December 2007, at 9:01 a.m.
9 messages -- Newest posted Sunday, 16 December 2007, at 2:19 p.m.
Hey it actually works! *PIC* -- Mike Schwing from Maryland -- Saturday, 15 December 2007, at 5:05 p.m.
9 messages -- Newest posted Wednesday, 19 December 2007, at 1:32 p.m.
A Hotdog for a LV LAJ -- Derek Cohen (in Perth, Australia) -- Sunday, 16 December 2007, at 12:22 a.m.
15 messages -- Newest posted Tuesday, 18 December 2007, at 8:00 p.m.
Reading Your Boards- #1 checks *LINK* -- Bill Tindall, E.TN -- Sunday, 16 December 2007, at 12:03 p.m.
2 messages -- Newest posted Sunday, 16 December 2007, at 12:05 p.m.
Help me ID this brace *LINK* *PIC* -- David Miller from Iowa -- Sunday, 16 December 2007, at 2:33 p.m.
4 messages -- Newest posted Wednesday, 19 December 2007, at 1:20 p.m.
Plow fence repair---new issue -- Jack Guzman from Maine -- Sunday, 16 December 2007, at 7:40 p.m.
19 messages -- Newest posted Wednesday, 19 December 2007, at 5:29 p.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 18 December 2007, at 7:28 a.m.
1 message
Daddy can't afford no Christmas here... -- Patrick Gibbons, Houston, TX -- Tuesday, 18 December 2007, at 8:18 a.m.
6 messages -- Newest posted Friday, 21 December 2007, at 10:42 a.m.
Hollows & Rounds -- Kevin Adams -- Tuesday, 18 December 2007, at 11:47 a.m.
10 messages -- Newest posted Wednesday, 19 December 2007, at 1:15 p.m.
Stanley/Bailey #7 Blade -- Nick Tuzzolino -- Tuesday, 18 December 2007, at 1:02 p.m.
11 messages -- Newest posted Wednesday, 19 December 2007, at 11:50 a.m.
Just "plane" level -- Marv -- Tuesday, 18 December 2007, at 2:51 p.m.
35 messages -- Newest posted Friday, 21 December 2007, at 6:52 p.m.
Monhagen Saw Works image needed -- toolemera -- Tuesday, 18 December 2007, at 8:52 p.m.
5 messages -- Newest posted Thursday, 20 December 2007, at 2:06 p.m.
Samauri Plane Blades? -- Tom MacGregor -- Wednesday, 19 December 2007, at 12:05 p.m.
3 messages -- Newest posted Wednesday, 19 December 2007, at 7:49 p.m.
A new low in tool making. -- Paul Kierstead -- Wednesday, 19 December 2007, at 4:59 p.m.
63 messages -- Newest posted Thursday, 3 January 2008, at 1:46 p.m.
Alan Bierbaum is gone -- Ellis Walentine -- Wednesday, 19 December 2007, at 5:28 p.m.
7 messages -- Newest posted Friday, 21 December 2007, at 10:59 a.m.
Stanley 95 Butt Gauge *PIC* -- Ted Owen, Pittsburgh -- Wednesday, 19 December 2007, at 10:24 p.m.
10 messages -- Newest posted Sunday, 23 December 2007, at 7:05 p.m.
legs not level -- chichi -- Thursday, 20 December 2007, at 12:31 a.m.
8 messages -- Newest posted Friday, 28 December 2007, at 6:15 a.m.
OT 'bay selling strategy? -- cooper suter -- Thursday, 20 December 2007, at 9:05 a.m.
11 messages -- Newest posted Saturday, 22 December 2007, at 7:33 a.m.
Bug Barton spokeshave *LINK* -- Todd O. Cronkhite Maine Native, Presently Away -- Thursday, 20 December 2007, at 3:40 p.m.
7 messages -- Newest posted Friday, 21 December 2007, at 8:15 p.m.
To Rob Lee re: tool collection -- Jack Guzman from Maine -- Thursday, 20 December 2007, at 5:59 p.m.
17 messages -- Newest posted Monday, 24 December 2007, at 6:57 p.m.
Christmas Memories, Fuller Brush and Ergonomics -- Patrick Gibbons, Houston, TX -- Friday, 21 December 2007, at 10:10 a.m.
2 messages -- Newest posted Sunday, 23 December 2007, at 7:07 p.m.
Card scraper material sources? -- Mike Schwing from Md. -- Friday, 21 December 2007, at 11:12 a.m.
5 messages -- Newest posted Saturday, 22 December 2007, at 5:41 a.m.
Misugi is gone :-( -- Denis Chénard, Orléans, Ont. -- Friday, 21 December 2007, at 12:13 p.m.
19 messages -- Newest posted Tuesday, 25 December 2007, at 9:08 p.m.
289 Cosmetic Surgery . . . *PIC* -- steve mackay -- Friday, 21 December 2007, at 4:53 p.m.
3 messages -- Newest posted Friday, 21 December 2007, at 7:39 p.m.
This is the story... *LINK* -- Rob Lee -- Friday, 21 December 2007, at 7:24 p.m.
9 messages -- Newest posted Tuesday, 25 December 2007, at 9:47 a.m.
Favorite wrapping paper *PIC* -- Moses Yoder in White Pigeon, MI -- Saturday, 22 December 2007, at 6:12 a.m.
4 messages -- Newest posted Sunday, 23 December 2007, at 7:33 a.m.
289 cap . . . -- steve mackay -- Saturday, 22 December 2007, at 2:16 p.m.
3 messages -- Newest posted Saturday, 22 December 2007, at 6:49 p.m.
Trouble with a 605 and blade advancing -- Dominic Greco in Richboro PA -- Saturday, 22 December 2007, at 6:51 p.m.
8 messages -- Newest posted Monday, 24 December 2007, at 6:41 a.m.
Wood boring gimlets -- flutegimlet -- Saturday, 22 December 2007, at 9:52 p.m.
19 messages -- Newest posted Sunday, 30 December 2007, at 12:14 a.m.
Lighthouse Service tool box *LINK* -- Ken Martin -- Monday, 24 December 2007, at 3:16 a.m.
5 messages -- Newest posted Tuesday, 25 December 2007, at 9:58 p.m.
Early Christmas gloat? *PIC* -- Mike Schwing from Maryland -- Monday, 24 December 2007, at 9:43 a.m.
6 messages -- Newest posted Thursday, 27 December 2007, at 4:34 p.m.
Chinese vs. British mortise gauges -- Bill Houghton, Sebastopol, CA -- Monday, 24 December 2007, at 2:24 p.m.
18 messages -- Newest posted Monday, 31 December 2007, at 4:23 p.m.
Happy holidays and thanks -- Bill Houghton, Sebastopol, CA -- Monday, 24 December 2007, at 2:29 p.m.
2 messages -- Newest posted Monday, 24 December 2007, at 6:46 p.m.
Merry Christmas to all! -- Denis Chénard, Orléans, Ont. -- Tuesday, 25 December 2007, at 12:07 a.m.
1 message
Merry Christmas ! -- Stuart Hough -- Tuesday, 25 December 2007, at 6:57 p.m.
1 message
Come here dear boy, have a cigar... -- Denis Chénard, Orléans, Ont. -- Wednesday, 26 December 2007, at 1:49 a.m.
7 messages -- Newest posted Friday, 28 December 2007, at 8:04 p.m.
Hats off to David Jeske! *PIC* -- Scott Burr in Ben Lomond, CA -- Wednesday, 26 December 2007, at 4:42 p.m.
18 messages -- Newest posted Tuesday, 1 January 2008, at 5:14 p.m.
Font size -- Jack Guzman from Maine -- Wednesday, 26 December 2007, at 5:12 p.m.
7 messages -- Newest posted Thursday, 27 December 2007, at 6:59 a.m.
ATTN: Paul Cates -- Todd O. Cronkhite Maine Native, Presently Away -- Wednesday, 26 December 2007, at 5:38 p.m.
1 message
Been gone...back... slightly OT -- Mike G. in SC -- Thursday, 27 December 2007, at 9:07 p.m.
2 messages -- Newest posted Thursday, 27 December 2007, at 10:22 p.m.
Camellia oil (!) -- Moses Yoder in White Pigeon, MI -- Friday, 28 December 2007, at 6:58 a.m.
24 messages -- Newest posted Monday, 31 December 2007, at 7:58 p.m.
New Web Site... *LINK* -- Stephen Shepherd in the State of Deseret -- Saturday, 29 December 2007, at 12:16 p.m.
6 messages -- Newest posted Monday, 31 December 2007, at 11:01 a.m.
A handle for my burnisher -- Dominic Greco in Richboro PA -- Saturday, 29 December 2007, at 10:34 p.m.
4 messages -- Newest posted Sunday, 30 December 2007, at 8:22 p.m.
New sharpening system... -- Mark Harrison - Brisbane, Australia -- Sunday, 30 December 2007, at 7:08 a.m.
22 messages -- Newest posted Saturday, 5 January 2008, at 10:47 p.m.
How I spent $80 today *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Sunday, 30 December 2007, at 3:30 p.m.
26 messages -- Newest posted Tuesday, 1 January 2008, at 10:16 p.m.
Hey Bill, they're clamps *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Sunday, 30 December 2007, at 3:58 p.m.
11 messages -- Newest posted Tuesday, 1 January 2008, at 11:27 p.m.
Planing Problems -- Jay St. Peter - SoMD -- Monday, 31 December 2007, at 7:48 a.m.
16 messages -- Newest posted Saturday, 5 January 2008, at 9:48 a.m.
Chris Schwarz, Thank You! -- Stuart Hough -- Monday, 31 December 2007, at 11:55 a.m.
12 messages -- Newest posted Wednesday, 2 January 2008, at 6:00 p.m.
anybody see Antique Road Show? -- Bill Tindall, E.TN -- Monday, 31 December 2007, at 10:45 p.m.
14 messages -- Newest posted Tuesday, 1 January 2008, at 9:06 p.m.
Happy New Year! -- Scott Burr in cold Ben Lomond, CA -- Tuesday, 1 January 2008, at 3:06 a.m.
18 messages -- Newest posted Thursday, 3 January 2008, at 9:14 a.m.
How I've spent my New Year's Day -- Bill Houghton, chillyish Sebastopol, CA -- Tuesday, 1 January 2008, at 6:12 p.m.
20 messages -- Newest posted Thursday, 3 January 2008, at 1:56 p.m.
holding down long/wide boards? -- Dominic Greco in Richboro PA -- Tuesday, 1 January 2008, at 8:23 p.m.
21 messages -- Newest posted Thursday, 3 January 2008, at 11:33 a.m.
Searching for Thoreau -- Todd O. Cronkhite Maine Native, Presently Away -- Tuesday, 1 January 2008, at 8:32 p.m.
46 messages -- Newest posted Thursday, 3 January 2008, at 11:10 p.m.
Homebuilt lathe 1of 5 *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Wednesday, 2 January 2008, at 8:36 p.m.
23 messages -- Newest posted Saturday, 5 January 2008, at 11:06 a.m.
GREAT video: hardwood edges on plywood -- Dominic Greco in Richboro PA -- Wednesday, 2 January 2008, at 9:35 p.m.
4 messages -- Newest posted Friday, 4 January 2008, at 1:08 p.m.
Is this a bargain? *LINK* -- Marv -- Thursday, 3 January 2008, at 10:31 a.m.
29 messages -- Newest posted Sunday, 6 January 2008, at 10:42 p.m.
Hardwood floor expansion -- David Miller from Iowa -- Thursday, 3 January 2008, at 2:37 p.m.
4 messages -- Newest posted Friday, 4 January 2008, at 1:52 p.m.
Sliding bevel gauge question -- Nathan Pettigrew -- Thursday, 3 January 2008, at 4:52 p.m.
5 messages -- Newest posted Friday, 4 January 2008, at 2:47 p.m.
Neander buddy needs a new blade. -- Scott Burr in Ben Lomond CA -- Friday, 4 January 2008, at 2:03 p.m.
11 messages -- Newest posted Sunday, 6 January 2008, at 2:03 a.m.
Brace Till Ideas? *PIC* -- David Miller from Iowa -- Friday, 4 January 2008, at 5:43 p.m.
15 messages -- Newest posted Sunday, 6 January 2008, at 6:29 a.m.
wooden plow revisited *PIC* -- Jack Guzman from Maine -- Saturday, 5 January 2008, at 8:25 a.m.
8 messages -- Newest posted Sunday, 6 January 2008, at 12:31 p.m.
Unknown Hardware find *PIC* -- Kevin French, Antrim, NH -- Saturday, 5 January 2008, at 8:41 a.m.
14 messages -- Newest posted Monday, 7 January 2008, at 12:07 p.m.
Info on making wood snowshoes? -- Dave Mount -- Saturday, 5 January 2008, at 2:04 p.m.
15 messages -- Newest posted Saturday, 12 January 2008, at 6:59 p.m.
Stanley Four Square Tools -- David Miller from Iowa -- Saturday, 5 January 2008, at 5:04 p.m.
1 message
Re: Holding down boards? What I ended up with -- Dominic Greco in Richboro PA -- Saturday, 5 January 2008, at 8:49 p.m.
10 messages -- Newest posted Monday, 7 January 2008, at 1:54 p.m.
Chisel handles ala Schwarz/cherubini -- HB -- Saturday, 5 January 2008, at 9:12 p.m.
5 messages -- Newest posted Tuesday, 8 January 2008, at 10:21 a.m.
Leon Robbins Levels *PIC* -- Greg Earley -- Saturday, 5 January 2008, at 10:43 p.m.
3 messages -- Newest posted Sunday, 6 January 2008, at 1:33 a.m.
cabinet scraper or scraping plane? -- Doug Boor -- Sunday, 6 January 2008, at 2:44 a.m.
4 messages -- Newest posted Sunday, 6 January 2008, at 10:02 p.m.
Annual Va Breakfast Saturday! -- Joe Rogers, Northern Virginia -- Sunday, 6 January 2008, at 10:20 a.m.
13 messages -- Newest posted Friday, 11 January 2008, at 7:10 p.m.
Turning Saws -- Paul in NJ -- Sunday, 6 January 2008, at 11:27 a.m.
24 messages -- Newest posted Thursday, 10 January 2008, at 9:58 a.m.
Three stones...Can somebody explain to -- VLParisian -- Sunday, 6 January 2008, at 12:20 p.m.
7 messages -- Newest posted Thursday, 10 January 2008, at 9:42 a.m.
Weekend Project *PIC* -- Kevin French, Antrim, NH -- Sunday, 6 January 2008, at 8:34 p.m.
3 messages -- Newest posted Monday, 7 January 2008, at 8:24 p.m.
Congratulations Mike Schwing! -- Chris K in MD -- Sunday, 6 January 2008, at 8:55 p.m.
7 messages -- Newest posted Monday, 7 January 2008, at 5:46 p.m.
Chris Schwarz--so many good tips! -- Roy Anderson -- Tuesday, 8 January 2008, at 5:59 a.m.
3 messages -- Newest posted Tuesday, 8 January 2008, at 2:50 p.m.
Nesting Tables progress report *PIC* -- Roy Anderson -- Tuesday, 8 January 2008, at 6:28 a.m.
5 messages -- Newest posted Thursday, 10 January 2008, at 7:03 p.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 8 January 2008, at 7:31 a.m.
1 message
Thanks Derek -- James Watriss -- Tuesday, 8 January 2008, at 11:39 a.m.
1 message
Shellac Source -- Tony - Memphis -- Tuesday, 8 January 2008, at 3:48 p.m.
16 messages -- Newest posted Thursday, 10 January 2008, at 6:11 p.m.
Ever wonder how the old timers... *PIC* -- Stephen Shepherd in the State of Deseret -- Tuesday, 8 January 2008, at 7:16 p.m.
14 messages -- Newest posted Thursday, 10 January 2008, at 10:07 a.m.
Made me a plane *PIC* -- Wayne -- Tuesday, 8 January 2008, at 10:52 p.m.
10 messages -- Newest posted Thursday, 10 January 2008, at 8:51 a.m.
OT - Access to Crown Plane web site -- TiO -- Wednesday, 9 January 2008, at 9:21 a.m.
4 messages -- Newest posted Wednesday, 9 January 2008, at 5:44 p.m.
Tools Near Lansdale, PA -- Bob R. -- Wednesday, 9 January 2008, at 10:17 a.m.
10 messages -- Newest posted Thursday, 10 January 2008, at 11:54 p.m.
An easy way to apply shellac -- Bill Tindall, E.TN -- Wednesday, 9 January 2008, at 10:39 a.m.
14 messages -- Newest posted Friday, 11 January 2008, at 4:43 p.m.
Why I hate my buddy 1of 3 *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Wednesday, 9 January 2008, at 1:20 p.m.
7 messages -- Newest posted Wednesday, 9 January 2008, at 7:12 p.m.
bedrock 602/need parts -- Jack from Copperhill -- Wednesday, 9 January 2008, at 1:44 p.m.
7 messages -- Newest posted Friday, 11 January 2008, at 5:10 p.m.
HUH? *LINK* -- Rocky Constable -- Wednesday, 9 January 2008, at 8:18 p.m.
9 messages -- Newest posted Saturday, 12 January 2008, at 1:30 p.m.
FW Tools and Shops -- Kevin French, Antrim, NH -- Wednesday, 9 January 2008, at 8:54 p.m.
5 messages -- Newest posted Friday, 11 January 2008, at 5:01 p.m.
Really cheap glue brush *PIC* -- Stephen Shepherd in the State of Deseret -- Thursday, 10 January 2008, at 8:06 a.m.
12 messages -- Newest posted Sunday, 13 January 2008, at 2:37 p.m.
Site Black Spray for saw sharpening? -- Tony - Memphis -- Thursday, 10 January 2008, at 12:25 p.m.
14 messages -- Newest posted Friday, 18 January 2008, at 7:10 p.m.
New blade for an old Plane (woodie)?? -- HB -- Thursday, 10 January 2008, at 4:48 p.m.
8 messages -- Newest posted Friday, 11 January 2008, at 10:24 p.m.
User Profile -- Stephen Shepherd in the State of Deseret -- Thursday, 10 January 2008, at 10:38 p.m.
15 messages -- Newest posted Tuesday, 15 January 2008, at 11:36 p.m.
Plane is by "J. Engle"??? -- HB -- Friday, 11 January 2008, at 8:49 a.m.
2 messages -- Newest posted Friday, 11 January 2008, at 5:17 p.m.
Where'd Dean J's bench article go? -- paul womack -- Friday, 11 January 2008, at 11:54 a.m.
6 messages -- Newest posted Friday, 11 January 2008, at 2:32 p.m.
length of burnisher shaft -- Bill Houghton, Sebastopol, CA -- Friday, 11 January 2008, at 1:13 p.m.
14 messages -- Newest posted Saturday, 12 January 2008, at 6:40 a.m.
Sweet (DEC10) -- Moses Yoder in White Pigeon, MI -- Saturday, 12 January 2008, at 7:01 a.m.
10 messages -- Newest posted Sunday, 13 January 2008, at 6:34 a.m.
First documented use of Hide Glue *PIC* -- Stephen Shepherd in the State of Deseret -- Sunday, 13 January 2008, at 2:41 p.m.
3 messages -- Newest posted Sunday, 13 January 2008, at 4:46 p.m.
DT's - Cut to line, on line, next to... -- Joe in a Cleveland Suburb -- Sunday, 13 January 2008, at 9:52 p.m.
44 messages -- Newest posted Friday, 18 January 2008, at 4:12 a.m.
SIX New Shop Shots -- David Yoho -- Monday, 14 January 2008, at 8:16 a.m.
1 message
more info on 602 bedrock *PIC* -- Jack from Copperhill -- Monday, 14 January 2008, at 11:49 a.m.
5 messages -- Newest posted Monday, 14 January 2008, at 2:19 p.m.
busted bessey clamps -- les winter -- Tuesday, 15 January 2008, at 11:30 a.m.
6 messages -- Newest posted Tuesday, 15 January 2008, at 10:41 p.m.
Toothed blades -- Denis Chénard, Orléans, Ont. -- Tuesday, 15 January 2008, at 2:49 p.m.
30 messages -- Newest posted Thursday, 24 January 2008, at 12:42 p.m.
More bench discussion *LINK* -- Alan Schwabacher -- Tuesday, 15 January 2008, at 4:14 p.m.
2 messages -- Newest posted Tuesday, 15 January 2008, at 5:54 p.m.
bench flatness--Cris how do you do it? -- McKay Sleight -- Tuesday, 15 January 2008, at 5:05 p.m.
30 messages -- Newest posted Monday, 21 January 2008, at 4:29 a.m.
Try plane -- McKay -- Tuesday, 15 January 2008, at 7:03 p.m.
11 messages -- Newest posted Thursday, 17 January 2008, at 4:22 p.m.
grinding a plane blade? -- Charles Jackson III -- Tuesday, 15 January 2008, at 8:53 p.m.
4 messages -- Newest posted Wednesday, 16 January 2008, at 5:35 p.m.
Old Home made plane? *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Friday, 11 January 2008, at 6:36 p.m.
4 messages -- Newest posted Thursday, 17 January 2008, at 9:29 a.m.
Multiple face hand plane *LINK* -- Robert Henderson -- Wednesday, 16 January 2008, at 8:23 a.m.
11 messages -- Newest posted Thursday, 17 January 2008, at 11:03 p.m.
Way off Topic but you need a laugh -- ron in Kokomo -- Wednesday, 16 January 2008, at 2:23 p.m.
13 messages -- Newest posted Thursday, 17 January 2008, at 6:20 p.m.
Well, Mr. Schwartz, I'm impressed... -- Denis Chénard, Orléans, Ont. -- Thursday, 17 January 2008, at 5:25 p.m.
5 messages -- Newest posted Friday, 18 January 2008, at 6:20 a.m.
help selecting marking gauge -- jon gaynor -- Friday, 18 January 2008, at 6:30 a.m.
24 messages -- Newest posted Thursday, 24 January 2008, at 9:55 p.m.
Angle of saw (dumbness confession) -- Bill Houghton, sunny Sebastopol, CA -- Friday, 18 January 2008, at 4:03 p.m.
2 messages -- Newest posted Friday, 18 January 2008, at 6:19 p.m.
Drive by Vacation Gloat -- David Miller from Iowa -- Friday, 18 January 2008, at 6:40 p.m.
3 messages -- Newest posted Saturday, 19 January 2008, at 12:45 p.m.
How to use a Stanley #50 -- Lee Schierer - McKean, PA -- Friday, 18 January 2008, at 7:36 p.m.
6 messages -- Newest posted Monday, 21 January 2008, at 4:44 a.m.
How was squareness determined in 1750? -- Bill Tindall, E.TN -- Saturday, 19 January 2008, at 4:52 p.m.
16 messages -- Newest posted Wednesday, 23 January 2008, at 6:27 a.m.
First Draft *PIC* -- Jack Guzman from Maine -- Saturday, 19 January 2008, at 6:58 p.m.
14 messages -- Newest posted Monday, 21 January 2008, at 6:43 a.m.
Frank Miller Lumber Mill Tour *LINK* -- Jennifer@Indy.USA -- Saturday, 19 January 2008, at 9:24 p.m.
3 messages -- Newest posted Sunday, 20 January 2008, at 2:09 p.m.
Salvage from the firewood pile *PIC* -- Dave Mount -- Sunday, 20 January 2008, at 12:19 a.m.
17 messages -- Newest posted Sunday, 20 January 2008, at 7:06 p.m.
H.Boker&co. plane iron -- Jack Guzman from Maine -- Sunday, 20 January 2008, at 8:17 a.m.
3 messages -- Newest posted Sunday, 20 January 2008, at 8:27 p.m.
***SURVEY: THE IDES OF JANUARY*** -- Ellis Walentine -- Sunday, 20 January 2008, at 9:28 a.m.
15 messages -- Newest posted Wednesday, 23 January 2008, at 3:51 p.m.
Mr. Jack Zimmernan . . . -- steve mackay -- Sunday, 20 January 2008, at 6:29 p.m.
9 messages -- Newest posted Monday, 21 January 2008, at 7:43 p.m.
Shellac/Wax Finishing Question -- Dave (Arlington, VA) -- Sunday, 20 January 2008, at 9:39 p.m.
18 messages -- Newest posted Tuesday, 22 January 2008, at 8:34 a.m.
New toy *PIC* -- Dan Donaldson -- Monday, 21 January 2008, at 12:48 a.m.
4 messages -- Newest posted Monday, 21 January 2008, at 5:29 p.m.
I Could Use a Hand -- Tom MacGregor -- Monday, 21 January 2008, at 10:57 a.m.
10 messages -- Newest posted Wednesday, 23 January 2008, at 8:54 p.m.
Steam Powered Sawmill -- Mike Fitterling -- Monday, 21 January 2008, at 1:55 p.m.
18 messages -- Newest posted Thursday, 24 January 2008, at 10:51 p.m.
What is up with this? *LINK* -- David Miller from Iowa -- Monday, 21 January 2008, at 10:01 p.m.
10 messages -- Newest posted Wednesday, 23 January 2008, at 5:24 a.m.
Woodworking al fresco -- Derek Cohen (in Perth, Australia) -- Tuesday, 22 January 2008, at 7:14 a.m.
4 messages -- Newest posted Tuesday, 22 January 2008, at 4:34 p.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 22 January 2008, at 7:24 a.m.
1 message
Spokeshave Recommendation -- Jerry Draper -- Tuesday, 22 January 2008, at 12:01 p.m.
10 messages -- Newest posted Wednesday, 23 January 2008, at 9:08 p.m.
Worksharp Vrs. Lee Valley machine -- Howard M -- Tuesday, 22 January 2008, at 2:45 p.m.
11 messages -- Newest posted Thursday, 24 January 2008, at 1:13 p.m.
York or Middle Pitch -- Hank Knight -- Tuesday, 22 January 2008, at 3:51 p.m.
15 messages -- Newest posted Friday, 25 January 2008, at 4:03 p.m.
how high will it go? *LINK* *PIC* -- old tool guy in san diego -- Tuesday, 22 January 2008, at 5:58 p.m.
5 messages -- Newest posted Thursday, 24 January 2008, at 5:43 a.m.
screwdriver query -- Bill Tindall, E.TN -- Tuesday, 22 January 2008, at 8:18 p.m.
17 messages -- Newest posted Thursday, 24 January 2008, at 12:08 a.m.
grits -- Dan Collins -- Wednesday, 23 January 2008, at 9:38 a.m.
4 messages -- Newest posted Wednesday, 23 January 2008, at 2:59 p.m.
PW honing guides review -- Gordon Thomas -- Wednesday, 23 January 2008, at 5:54 p.m.
47 messages -- Newest posted Monday, 28 January 2008, at 8:14 p.m.
Chester Co Chest *PIC* -- Bill Tindall, E.TN -- Wednesday, 23 January 2008, at 5:54 p.m.
26 messages -- Newest posted Sunday, 27 January 2008, at 11:38 p.m.
Chris Schwarz, your advice needed. -- Stuart Hough -- Thursday, 24 January 2008, at 2:03 p.m.
15 messages -- Newest posted Saturday, 26 January 2008, at 8:07 p.m.
Alternative to Southern Yellow Pine? -- Paul Erickson -- Friday, 25 January 2008, at 1:54 p.m.
12 messages -- Newest posted Monday, 28 January 2008, at 6:15 p.m.
Evidence of Toothing *PIC* -- Stephen Shepherd in the State of Deseret -- Friday, 25 January 2008, at 9:03 p.m.
15 messages -- Newest posted Tuesday, 29 January 2008, at 5:04 a.m.
Sharpening a saw - Which file? -- Denis Chénard, Orléans, Ont. -- Saturday, 26 January 2008, at 11:01 a.m.
26 messages -- Newest posted Monday, 28 January 2008, at 8:26 p.m.
Core material for veneering--need help -- Wiley Horne -- So. Calif. -- Saturday, 26 January 2008, at 9:24 p.m.
25 messages -- Newest posted Tuesday, 29 January 2008, at 5:29 p.m.
Rock-ON!!! -- ThomD -- Sunday, 27 January 2008, at 12:49 a.m.
3 messages -- Newest posted Sunday, 27 January 2008, at 3:07 p.m.
Folley Filer -- ThomD -- Sunday, 27 January 2008, at 12:54 a.m.
5 messages -- Newest posted Sunday, 27 January 2008, at 5:26 p.m.
Beeswax & mineral oil -- Moses Yoder in White Pigeon, MI -- Sunday, 27 January 2008, at 7:14 a.m.
4 messages -- Newest posted Wednesday, 30 January 2008, at 7:30 a.m.
Chisels and "ruler trick" -- Bill Tindall, E.TN -- Sunday, 27 January 2008, at 10:36 a.m.
6 messages -- Newest posted Monday, 28 January 2008, at 4:31 a.m.
A nice little hand tool user *PIC* -- Peter Hyde -- Sunday, 27 January 2008, at 1:06 p.m.
2 messages -- Newest posted Monday, 28 January 2008, at 11:03 p.m.
Tool chest with turning tools inside *PIC* -- David Churnega -- Sunday, 27 January 2008, at 4:50 p.m.
8 messages -- Newest posted Wednesday, 30 January 2008, at 4:10 a.m.
"Peening" anvil . . . *PIC* -- steve mackay -- Sunday, 27 January 2008, at 5:00 p.m.
14 messages -- Newest posted Thursday, 31 January 2008, at 4:26 a.m.
Well, sharpened my first saw today... -- Denis Chénard, Orléans, Ont. -- Sunday, 27 January 2008, at 5:25 p.m.
7 messages -- Newest posted Sunday, 3 February 2008, at 6:58 p.m.
OT - if you repair plumbing *PIC* -- Bill Houghton, Sebastopol, CA, 4" rain/24 hou -- Sunday, 27 January 2008, at 6:23 p.m.
4 messages -- Newest posted Monday, 28 January 2008, at 11:16 a.m.
The Ruler Trick and stropping *PIC* -- Derek Cohen (in Perth, Australia) -- Sunday, 27 January 2008, at 11:51 p.m.
31 messages -- Newest posted Saturday, 2 February 2008, at 6:09 a.m.
NEW Shop Shot -- David Yoho -- Monday, 28 January 2008, at 7:57 a.m.
1 message
Secret fishing hole revealed -- Kevin French, Antrim, NH -- Monday, 28 January 2008, at 4:27 p.m.
7 messages -- Newest posted Wednesday, 30 January 2008, at 10:54 p.m.
Plane Repair Question -- Tom MacGregor -- Tuesday, 29 January 2008, at 5:45 a.m.
6 messages -- Newest posted Friday, 1 February 2008, at 4:26 a.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 29 January 2008, at 7:25 a.m.
1 message
Return to service . . . *PIC* -- steve mackay -- Tuesday, 29 January 2008, at 11:26 a.m.
16 messages -- Newest posted Thursday, 31 January 2008, at 1:53 p.m.
Audels Carpenters and Builders Guide -- Mark Kuzee -- Tuesday, 29 January 2008, at 12:02 p.m.
8 messages -- Newest posted Wednesday, 30 January 2008, at 8:37 a.m.
Hey, Dave Mount *LINK* -- Todd O. Cronkhite Maine Native, Presently Away -- Tuesday, 29 January 2008, at 6:44 p.m.
8 messages -- Newest posted Wednesday, 30 January 2008, at 5:35 p.m.
Shop Art Suggestions? -- David Miller from Iowa -- Wednesday, 30 January 2008, at 3:19 p.m.
10 messages -- Newest posted Saturday, 2 February 2008, at 10:08 a.m.
Mutt planes . . . -- steve mackay -- Wednesday, 30 January 2008, at 8:10 p.m.
3 messages -- Newest posted Wednesday, 30 January 2008, at 10:50 p.m.
Sharpening Plane Irons -- Stephen Shepherd in the State of Deseret -- Thursday, 31 January 2008, at 7:39 a.m.
16 messages -- Newest posted Thursday, 7 February 2008, at 10:26 a.m.
Adjusting my expectation of perfection -- Stephen Kirk in Quakertown, PA -- Thursday, 31 January 2008, at 12:01 p.m.
29 messages -- Newest posted Tuesday, 5 February 2008, at 1:08 p.m.
Just plane cool - OT probably *LINK* *PIC* -- Mike Schwing from Maryland -- Thursday, 31 January 2008, at 5:44 p.m.
2 messages -- Newest posted Friday, 1 February 2008, at 4:53 p.m.
Mutt plane . . . *PIC* -- steve mackay -- Thursday, 31 January 2008, at 8:10 p.m.
23 messages -- Newest posted Tuesday, 5 February 2008, at 8:36 a.m.
Uses of edge-trimming block plane *LINK* -- Bill Houghton, Sebastopol, CA, rainin' again -- Thursday, 31 January 2008, at 9:28 p.m.
3 messages -- Newest posted Friday, 1 February 2008, at 12:21 a.m.
Daryl Weir -- John Hoffman -- Friday, 1 February 2008, at 7:51 a.m.
30 messages -- Newest posted Monday, 11 February 2008, at 4:28 a.m.
Mr. Hackett . . . -- steve mackay -- Friday, 1 February 2008, at 11:51 a.m.
2 messages -- Newest posted Sunday, 3 February 2008, at 11:54 a.m.
Am I missing something? *LINK* -- Bill Houghton, Sebastopol, CA, sunny so far! -- Friday, 1 February 2008, at 12:08 p.m.
7 messages -- Newest posted Sunday, 3 February 2008, at 6:33 a.m.
In praise of LV spokeshaves *PIC* -- Dave Mount -- Saturday, 2 February 2008, at 11:38 a.m.
26 messages -- Newest posted Monday, 4 February 2008, at 7:55 a.m.
Archive? -- Dave Mount -- Saturday, 2 February 2008, at 2:02 p.m.
7 messages -- Newest posted Tuesday, 5 February 2008, at 12:42 p.m.
Spokeshaves: Wooden v Metal -- Stephen Shepherd in the State of Deseret -- Saturday, 2 February 2008, at 7:00 p.m.
35 messages -- Newest posted Thursday, 7 February 2008, at 4:41 a.m.
jointer planes -- David -- Sunday, 3 February 2008, at 10:52 a.m.
14 messages -- Newest posted Monday, 4 February 2008, at 10:45 p.m.
LN Paring Chisels -- James Blandford-Baker -- Sunday, 3 February 2008, at 3:33 p.m.
6 messages -- Newest posted Tuesday, 5 February 2008, at 8:17 p.m.
Hatchets? -- Brad in Ottawa -- Monday, 4 February 2008, at 1:40 p.m.
28 messages -- Newest posted Wednesday, 6 February 2008, at 5:01 p.m.
What is an acute angle for a paring chisel? -- Doug Reynolds in Seattle -- Monday, 4 February 2008, at 3:18 p.m.
5 messages -- Newest posted Thursday, 7 February 2008, at 3:11 a.m.
Traditional building class *PIC* -- McKay -- Monday, 4 February 2008, at 6:36 p.m.
3 messages -- Newest posted Tuesday, 5 February 2008, at 2:30 p.m.
Using the Great Big Blade -- Stephen Shepherd in the State of Deseret -- Monday, 4 February 2008, at 10:27 p.m.
15 messages -- Newest posted Wednesday, 6 February 2008, at 11:43 a.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 5 February 2008, at 7:47 a.m.
1 message
Auriou coming back from the dead! *LINK* -- wilbur -- Tuesday, 5 February 2008, at 10:10 a.m.
7 messages -- Newest posted Thursday, 7 February 2008, at 5:20 p.m.
Lapping plane soles -- Martin -- Tuesday, 5 February 2008, at 1:25 p.m.
6 messages -- Newest posted Wednesday, 6 February 2008, at 1:08 p.m.
Cut dovetails with the biggest saw you can find -- Stephen Kirk in Quakertown, PA -- Tuesday, 5 February 2008, at 4:53 p.m.
14 messages -- Newest posted Friday, 8 February 2008, at 12:22 p.m.
What is this hammer *LINK* -- Todd O. Cronkhite Maine Native, Presently Away -- Tuesday, 5 February 2008, at 8:10 p.m.
7 messages -- Newest posted Wednesday, 6 February 2008, at 4:29 p.m.
Age of Stanley #7 -- tek-Brunswick, Ohio -- Wednesday, 6 February 2008, at 4:50 p.m.
3 messages -- Newest posted Wednesday, 6 February 2008, at 7:29 p.m.
Totally OT (mostly) *LINK* -- Dan Donaldson -- Wednesday, 6 February 2008, at 9:44 p.m.
5 messages -- Newest posted Thursday, 7 February 2008, at 2:47 p.m.
Big Saws *PIC* -- Stephen Shepherd in the State of Deseret -- Wednesday, 6 February 2008, at 9:52 p.m.
11 messages -- Newest posted Saturday, 9 February 2008, at 3:47 p.m.
Pegged joints -- Denis Chénard, Orléans, Ont. -- Wednesday, 6 February 2008, at 10:05 p.m.
8 messages -- Newest posted Friday, 8 February 2008, at 2:55 p.m.
A Todd Hughes Hatchet 1of4 *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Wednesday, 6 February 2008, at 10:41 p.m.
10 messages -- Newest posted Thursday, 7 February 2008, at 3:22 p.m.
Odd Stanley Block Plane 1 of 5 *PIC* -- charle belden -- Thursday, 7 February 2008, at 2:53 a.m.
5 messages -- Newest posted Thursday, 7 February 2008, at 1:44 p.m.
Odd Stanley Block Plane 5 of 5 *PIC* -- charle belden -- Thursday, 7 February 2008, at 2:59 a.m.
4 messages -- Newest posted Thursday, 7 February 2008, at 11:23 a.m.
Not for Beginners -- Stephen Shepherd in the State of Deseret -- Thursday, 7 February 2008, at 7:40 a.m.
20 messages -- Newest posted Friday, 15 February 2008, at 2:15 p.m.
how flat is flat enough -- RobRing -- Friday, 8 February 2008, at 6:23 p.m.
38 messages -- Newest posted Sunday, 17 February 2008, at 5:16 a.m.
Name this saw *PIC* -- David Miller from Iowa -- Saturday, 9 February 2008, at 9:32 a.m.
8 messages -- Newest posted Monday, 11 February 2008, at 1:05 p.m.
Are you tired of busting your nuts? *LINK* -- Alan DuBoff -- Saturday, 9 February 2008, at 4:58 p.m.
42 messages -- Newest posted Tuesday, 12 February 2008, at 9:17 a.m.
Garbage sale oddities *PIC* -- Bill Houghton, Sebastopol, CA, gloriously sunny -- Saturday, 9 February 2008, at 10:59 p.m.
9 messages -- Newest posted Monday, 11 February 2008, at 8:52 p.m.
Millers Falls -- tek-Brunswick, Ohio -- Sunday, 10 February 2008, at 9:25 a.m.
3 messages -- Newest posted Monday, 11 February 2008, at 2:23 p.m.
No 7 Bailey -- Tom Libby -- Sunday, 10 February 2008, at 11:46 a.m.
4 messages -- Newest posted Monday, 11 February 2008, at 5:06 p.m.
Sargent 710 Problem -- Mark in Texas -- Sunday, 10 February 2008, at 11:50 a.m.
1 message
Another Rookie discovery . . . -- steve mackay -- Sunday, 10 February 2008, at 4:59 p.m.
3 messages -- Newest posted Monday, 11 February 2008, at 5:16 p.m.
Flattening soles of wooden planes -- Mark Harrison -- Brisbane Australia -- Monday, 11 February 2008, at 6:22 a.m.
11 messages -- Newest posted Tuesday, 12 February 2008, at 8:12 a.m.
New Bench *PIC* -- Roderick Drumgoole -- Monday, 11 February 2008, at 2:54 p.m.
39 messages -- Newest posted Tuesday, 12 February 2008, at 9:30 p.m.
Wipe on poly gel -- Bob from GB -- Monday, 11 February 2008, at 4:20 p.m.
1 message
Here is one for you -- Stephen Shepherd in the State of Deseret -- Monday, 11 February 2008, at 5:44 p.m.
2 messages -- Newest posted Monday, 11 February 2008, at 5:56 p.m.
Speaking of Nuts -- Stephen Shepherd in the State of Deseret -- Monday, 11 February 2008, at 7:26 p.m.
2 messages -- Newest posted Tuesday, 12 February 2008, at 1:18 a.m.
Sand'n the sole . . . -- steve mackay -- Monday, 11 February 2008, at 8:07 p.m.
3 messages -- Newest posted Monday, 11 February 2008, at 9:32 p.m.
Oil for tools -- Scott Burr in somewhat warn Ben Lomond, CA -- Monday, 11 February 2008, at 8:55 p.m.
27 messages -- Newest posted Friday, 15 February 2008, at 6:40 p.m.
Shop built Marking knives and awls -- Dominic Greco in Richboro PA -- Monday, 11 February 2008, at 9:32 p.m.
16 messages -- Newest posted Tuesday, 12 February 2008, at 7:49 p.m.
Wood movement; Table and Bench tops. *PIC* -- James Watriss -- Monday, 11 February 2008, at 11:01 p.m.
16 messages -- Newest posted Friday, 15 February 2008, at 9:41 p.m.
Working with leather Qs -- Alan DuBoff -- Tuesday, 12 February 2008, at 1:01 a.m.
102 messages -- Newest posted Sunday, 24 February 2008, at 9:21 a.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 12 February 2008, at 7:32 a.m.
1 message
